该词条未找到_海词词典

您要查找的是不是：

Keywords Reactive Extrusion;Synthesis;PLA;Devolatilization; 反应挤出;合成;聚乳酸;脱挥;
Keywords Reactive extrusion;Numerical simulation;Free radical polymerization;Chemorheology;Finite volume method; 反应挤出;数值模拟;自由基聚合;化学流变;有限体积法;
Keywords Reactive extrusion;Free radical polymerization;Chemorheology;Numerical simulation;Gel effect; 反应挤出;自由基聚合;化学流变;数值模拟;凝胶效应;
Keywords reactive extrusion;grafting;ethylene propylene diene mischpolymere;maleic anhydride;initiator; 反应挤出;接枝;三元乙丙共聚物;马来酸酐;引发剂;
Keywords reactive extrusion blend;oxazoline functional polystyrene;polycarbonate; 反应性挤出共混;恶唑啉官能化聚苯乙烯;聚碳酸酯;
Recycled PET/PA66 composites were prepared through reactive extrusion technology with OZ as the compatilizer. 采用OZ作为反应相容剂,通过反应挤出制备了回收聚对苯二甲酸乙二酯(PET)/聚酰胺66(PA66)复合材料。
Grafted material of itaconic acid onto low-density polyethylene (LDPE) was prepared by melt reactive extrusion. 利用反应挤出技术制备了低密度聚乙烯(LDPE)/亚甲基丁二酸接枝物。
Results show that the reactive speed of catalysed system can meet the retention time of reactive extrusion based on twin-screw extruder. 结果表明,催化体系的聚合反应速度完全满足双螺杆挤出机反应挤出停留时间的要求。
New methods of preparing novel polymer and modifying polymer are grafting of polymer by reactive extrusion and in the Haake torque rheometer. 综述了利用哈克转矩流变仪及采用反应挤出法制备接枝聚合物的特点及接枝体系的选择。
The melt gragting of maleic anhydride (MAH) onto polyolefin elastomer (POE) was carried out via reactive extrusion by twin-screw extruder. 用同向双螺杆挤出机进行热塑性聚烯烃弹性体(POE)熔融接枝马来酸酐(MAH)的反应,考察了MAH单体、引发剂用量和加工条件对接枝率的影响。
It is considered that reactive extrusion technique is an economical and feasible way of producing esterized starch in contras... 与传统的湿法和干法工艺相比,反应挤出法是酯化淀粉生产中一种经济可行的方法。
The principle and peculiarity of reactive extrusion were reviewed . The structure of reactive extruder, and development of reactive extrusion were also introduced. 介绍了反应挤出的原理和特点、反应挤出机的结构、反应挤出的应用以及反应挤出的发展方向。
The melt grafting of maleic anhydride (MAH) onto ethylene propylene diene mischpolymere (EPDM) was carried out via reactive extrusion by twin screw extruder. 用同向双螺杆挤出机,对三元乙丙共聚物(EPDM)进行熔融接枝马来酸酐(MAH),考察了单体、引发剂(DCP)用量和加工条件对接枝率的影响。
The numerical simulation of reactive extrusion processes for polymerization is helpful towards control of chemical reaction,material structure,and prediction of limiting process conditions. 聚合反应挤出过程的数值模拟有助于实现化学反应控制、材料结构控制与极限加工条件的预测。
Keywords Haake torque rheometer;reactive extrusion;grafting; 哈克转矩流变仪;反应挤出;接枝;
Keywords reactive dyes;cotton fabric;jigger;dyeing; 活性染料;棉织物;卷染机;染色;
Keywords reactive dye;quinoxaline;kinetic; 活性染料;喹啰啉;动力学;
REACTIVE EXTRUSION HDPE GRAFT DIM 反应性挤出HDPE接枝马来酸二异丙酯
Keywords PEX;reactive extrusion;co-rotating twin-screw extruders;combination; 硅烷交联聚乙烯;反应挤出;平行同向双螺杆挤出机;组合;
Keywords reactive dyes;covalent bond;hydrolysed dyes;fixation; 活性染料;共价键;水解染料;固色率;